*
I was at a job meeting last week about an exterior masonry facade restoration project at Mills Mansion State Historic Site in Staatsburg, NY and the architect used the term “bagging” to describe a very thin application of a “plaster” material to fill cracks in a fluted pilaster. I later asked a local plasterer if he had heard the term used in this context. This was new to both of us. Is this in common usage in the northeast? Does anyone have a definition of the term?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Skim-coating with joint compound covers texture, renews old drywall and plaster, and leaves smooth surfaces ready to paint.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
Maybe like over in cookstalk, that frosting bag only filled with plaster. The original caulk gun. That's all I could come up with.
*calvin man, please don't tell me you're goin' over there with Beckman and Cadioli now. This is gettin' bad.
*Bill, I agree with Calvin's definition, but the real icing on the cake would be a call to that architect and then a posting of his genuine definition.
*Jim,I know it sounds goofy, but some of em don't wear any underwear under those aprons. No joke.Can't see it from my house, but damn tryin'
*well, er, you mean the guys, or the gals?
*Bill, don't take any notice of the ragging these jokers are giving about bagging.Bagging is applying a thin slurry coat of plaster over brick, render etc. It was applied with a piece of hessian bag originally , hence the term bagging, however these days most use a sponge. Wet your substrate down first to avoid too much suction.
*The ladies Jim, the ladies.
*
Mark,
Do you have any more history on the term? It is supposedly in common usage in masonry/plasterer circles in New York City but here in upstate NY, I get shrugs when I ask professionals to give me an definition.
*It just goes to show you that there is no tried and true deffinitions for a lot of plastering terms.In Cal. bagging was the practice of using burlap to float out a brown coat.....obviously meaning low-quality.....A plasterer that was called a bagger was a very low quality plasterer.BrewOldHouseForums.network
*
I was at a job meeting last week about an exterior masonry facade restoration project at Mills Mansion State Historic Site in Staatsburg, NY and the architect used the term "bagging" to describe a very thin application of a "plaster" material to fill cracks in a fluted pilaster. I later asked a local plasterer if he had heard the term used in this context. This was new to both of us. Is this in common usage in the northeast? Does anyone have a definition of the term?