anyone know what would be a good way to hide the end grain on these nosings?? Also if someone could embed these picture that would be great..i don’t know. Thanks for taking the time to look.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
The RealTruck AMP Research Bedsteps give you easy access to your truck-bed storage.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
cut them a little longer, mitre and return into the top of the skirt.
and if they are all already cut?
Click here for access to the Woodshed Tavern
Click here to visit the beginning of Breaktime
What Gordsco says.
From the reflection I'm guessing there is glass on the open side?
As the first person said cutting longer & miter return.
And if they are already cut, raise the knee wall to terminate at a skirtboard... but you probably already thought of that and were hoping for something cheaper.
Router the top and bottom slightly.
You're going to need some stain and varnish or a touch up guy.
To embed, preview your post and copy the pics. Paste after re-opening.
"Perfect is the enemy of Good." Morrison
84420.85 is an old post talking about embedding pics.
Click here for access to the Woodshed Tavern
Click here to visit the beginning of Breaktime