Roof patio ona row home – good patio coating materials and techniquies.
I own a rowhome in Baltimore city on which I am tearing up a rotted low pitch asphault shingle roof (to low pitch for asphault shingles). To get something out of this mess I am looking to make a roof patio on the 38×13 foot second floor space, framing out a 1/4 inch per foot slope new roof. not this deck is over an indoor living space. I am looking for the mest roof patio materials to use… Duradek, deck king, epoxy paints, epdm, etc…. the one material I seem to keep coming back to is Sani-tred. Has anyone here ever used this? AMES research labs seems to have something similar but not quite as good. I like that pathing in the future is easy (if ever required) , seemless, and that the sani-tred actually absorbs into and bonds to plywood (or many other building materials). I dont know, for some reason this seems much better to me than vinyl or pvc glued down sheeting with seams.
http://www.sanitred.com/DeckMaterial.htm
I am just a DIYer, but maybe this stuff will hep some of you guys in a search for alternative materials.
I would love to get feedkback or experiences with thsi stuff… If you have any comments on this stuff either post here or let me know at [email protected]
If I end up using this stuff maybe Ill try to photo/ video document it and post somewhere.
also, kn the case of sanitred, I am trying to think of the best way to tie to a drip edge or flashing on the side the water will fall off.
Thanks!
Brent