Hi, I’m new to posting but have been reading for some time.
The family acquired a concrete and steel building. The old glass warehouse has one floor of nice terrazzo . The stud wall fasteners connecting to the floor are the latest challenge, http://w3st.com/100/before.jpg, I’m wondering if there’s any way to remove the studs without damaging the floors, http://w3st/100/after.jpg, and if not, the best way to remove them with minimal damage. My prying technique is obviously not working.
Much obliged for any helpful suggestions.
Scott
Replies
Hi Scott- If you don't have to save the sills it looks like a job for a fresh blade in a milwalkee sawzall. I'd start outside the head and a slight angle under it to the stem. But it looks like there should be a way to pop that off of there. Time for a voice of experience.
Edited 5/28/2002 11:09:24 PM ET by rez
Sorry here's a picture of the pockmark, http://w3st.com/100/after.jpg
Scott