Anyone ever seen or heard of small size masonry drill bits for SDS chuck system? Smallest I can find at my retailer is 3/16. Would like to get 1/8 and 5/32 because I occasionally use those and it means I still have to carry around my old regular shank hammer drill.
TIA,
Wally
Lignum est bonum.
Replies
3/16 is the smallest I have seen.
what would you use smaller bits for?
5/32 for Tapcons, 1/8 for pre-drilling stucco before fastening exterior trims.
WallyLignum est bonum.
pre-drill with the 5/32....
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming
WOW!!! What a Ride!
I have several 5/32" Bosch SDS bits that I use for 3/16" Tapcons when using the SDS to install them. I've never seen 1/8" in SDS. The SDS hammers may hit the bit too hard for such a small bit to keep from crumpling up.
Bill
5/32" is the smallest I'm aware of.. Lowes... $3.45...Each...
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming
WOW!!! What a Ride!
sly,
There is an adapter that chucks into the SDS that allows use of regular drill bits.
KK