Hi Folks,
Does anybody have data regarding software for cabinetmaking?
I would rather work out my dimensions on the pc during design, than when I start to build.
Specific needs:
Generate a cutlist, dimensions of framing parts, locations for hinges, slides for drawers etc.
My drafting skill are pretty bad, so better to use the PC.
I apprecaite your feedback,
SW
Discover a drywall-free approach to refinishing a partially demoed wall.
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial NowGet instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
stu, you'll get better results posting this at Breaktime or Knots, and you can do a search of the archives for lots of old threads on this topic. The short answer is that there are several programs that do what you suggest but they are pricy$$$.
Mike
Thanks Mike,I checked all the archives I could find (after I posted, of course), and I agree with you.
It seems that unless you are a builder or a designer, paper and pencil will have to do.Thanks again,SW
try http://www.ecabinetsystems.com software does what you want and it's free. Kurt
Edited 9/6/2005 2:08 pm ET by klock