Replies

1. 
   RickG_ | Feb 15, 2000 10:25am | #2

   *
   John:

   You may also want to look at the sci.engr.joining.welding newsgroup.

   Rick

2. 
   Jared | Feb 15, 2000 05:20pm | #3

   *
   John - try http://www.insidetheweb.com

   This discussion is led by MarkKW - very knowledgeable welder.

3. 
   Guest_ | Feb 15, 2000 11:37pm | #4

   *
   Probably the most comprehensive discussion of welding technology is at the American Welding Society discussion board:

   http://www.aws.org/bb/technical/

   There are actually several discussion groups on the AWS web site, with a couple of them focusing on welding education. You can get to the AWS home page here:

   http://www.amweld.org/

   There are a number of local chapters of the AWS that have web sites, but I have not seen one that has a particularly active discussion board other than the main AWS board.

   While MarkKW does give some good advice on welding at his InsideTheWeb discussion board at:

   MarkKW's Tool Nut Discussion Board ,

   it is only incidental to the main focus of the discussion board which is a general discussion of various tools, with much of the discussion on mechanics' hand tools.

1. 
   Guest_ | Feb 16, 2000 09:47am | #6

   *thanks everyone your help is very much appreciated - john

4. 
   Guest_ | Feb 16, 2000 09:47am | #5

   *
   does anyoneknow of a good site for online welding discussion? thanks

1. 
   Guest_ | Feb 15, 2000 06:53am | #1

   *John,A number of welders post on the "Tool Talk" board at http://www.ytmag.com (Yeserday's Tractor Magazine). Click on "Forums" and then "Tool Talk". Steve