Q:

I plan to use PEX tubing throughout the house I’m building. Someone told me that compared to a traditional trunk-and-branch system, a home-run system with manifolds will save water and energy.

Rob Jones, via email, None

A:

Georg Efird, owner of A2Z Plumbing Inc. ( www.eatsleepplumb.com ) in Asheville, N.C., replies: First, let me recap the difference between the two systems. A trunk-and-branch system consists of several branch lines (usually 1/2 in. dia.) that run off a main trunk line (usually 3/4 in. dia.). A home-run manifold system consists of uninterrupted lines that run directly from a manifold to each fixture in a house.

The main water-saving benefit of a home-run system is that there is less tepid water to purge in hot-water lines. If you’re not purging as much tepid water, you’re also improving the hot-water delivery time, which in turn saves energy.

How is it possible that there’s less water to purge? The simple fact is, the smaller lines in a home-run system carry less water. As an example, consider that a 3/4-in.-dia. line carries nearly twice the volume of water as a 1/2-in.-dia. line of the same length. Although water is traveling the same distance in both systems, less water is actually traveling through a home-run line than through the trunk or branch lines.

No matter which system you use, fittings create friction, and friction negatively impacts water pressure. Because there are so few fittings in a home-run system, home-run lines can be smaller than branch lines—as small as 3/8 in. dia.—without negatively impacting water pressure.