Podcast Episode 129 – Don’t Be a Heat Freak
Repairing termite damage, protecting sump pumps, high-efficiency boilers, and roof-deck insulation.
Justin Fink, Matt Millham, and Patrick McCombe dive right into some listener questions about a worst-case repair situation (termite damage to an inaccessible rim joist), radon pumps and their effect on sump pumps, high-efficiency vs. standard boilers, and insulating a porch attic roof.
Question 1, from Brent: After removing some old cellulose insulation between the floor joists and the basement, my wife and I stumbled on some pretty significant termite damage to our rim joist. This damage spans roughly 8 ft. and also about 2 ft. in another separate area. The termite issue has been resolved, however I would like to repair/replace the rim joist that is severely damaged, and I was interested to hear how you guys might tackle this issue.
Access to it from the outside isn’t really an option, due to the fact that this damage takes place behind concrete steps. The hole you can see in the picture is accessed right under the front steps; surprisingly there is minimal damage to the floor joist, however there are areas of significant damage to the sill plate. I’m guessing that needs to be replaced as well. I’d be very interested to hear how you guys might repair this, and what advice you have for these repairs.
Question 2, from Justin, is a video question about radon pumps and their affect on sump pumps: Click here to watch the video. (Justin doesn’t mention it in the video, but the basement drain is cracked and clogged with dirt so he can’t route the condensation to it.)
Question 3, from Collin: My wife and I are planning to build a new home for ourselves in the foothills outside Denver. We are planning to install radiant floor heat, and we are currently debating whether to install a high-efficiency combination boiler, or a standard atmospherically vented boiler. I like the idea of a high-efficiency unit, and since we’re planning to build a pretty tight house I also think that a sealed combustion chamber is a safer option. On the other hand, a few local mechanical contractors have told me that the lifespan on a high-efficiency unit is only 10 to 15 years versus 30+ years for a standard boiler.
Our fuel source is natural gas and we are planning to build at 8000 ft. above sea level. What are your impressions of the reliability of high efficiency boilers? Given the lifespan costs of both units, which would you prefer?
Question 4, from Bill:
This episode of the podcast is brought to you by Benjamin Obdyke.
Benjamin Obdyke would like to use the special occasion of their 150th anniversary to thank the nuisances that builders and homeowners despise. Their premium products protect from those pesky things like rain, snow, humidity and the neighbor’s sprinkler system. Take HydroGap, a drainable housewrap that eliminates moisture from your wall assembly. Or Cedar Breather, an underlayment for wood roofing that allows continuous airflow behind shingles or shakes. One man’s headache is another man’s successful business. To build better with Benjamin Obdyke, visit benjaminobdyke.com.
We hope you will take advantage of a great offer for our podcast listeners: A special 20% off discounted rate to subscribe to the Fine Homebuilding print magazine. That link goes to finehomebuilding.com/podoffer.
The show is driven by our listeners, so please subscribe and rate us on iTunes or Google Play, and if you have any questions you would like us to dig into for a future show, shoot an email our way: firstname.lastname@example.org. Also, be sure to follow Justin Fink and Fine Homebuilding on Instagram — and “like” the magazine on Facebook. Note that you can watch the show above, or on YouTube at the Fine Homebuilding YouTube Channel.
The Fine Homebuilding Podcast embodies Fine Homebuilding magazine’s commitment to the preservation of craftsmanship and the advancement of home performance in residential construction. The show is an informal but vigorous conversation about the techniques and principles that allow listeners to master their design and building challenges.
Links for this episode:
- The Dranjer F-S2, designed to fit into the sump cover.
- Here’s the high-efficiency furnace payback calculator Justin used.
- All FHB podcast show notes: FineHomebuilding.com/podcast.
- #KeepCraftAlive tee-shirts support scholarships for building trades students. So go order some shirts at KeepCraftAlive.org.
- The direct link to the online store is here.