December 30, 2010
See how to prepare an opening in a counter top, and learn how to seal and fasten all the fixtures, before you drop your new sink into place.
December 29, 2010
Electrician Brian Walo gives a quick but important tour of a typical subpanel.
December 16, 2010
Plumber Bruce Norman will walk you through the steps to remove an old kitchen sink, and help you decide what to do next.
November 24, 2010
Carpenter Scott Grice shows how easy it is to frame an arched doorway using a few backer blocks and two plywood arcs.
November 18, 2010
Cut perfect plywood arcs to frame curved window or door rough openings. All you need is a tape measure, a pencil, and these simple layout tips.
October 15, 2010
Builder Scott Grice shows how to use a 2x4 brace and kicker to get your new framed walls plumb and straight.
September 3, 2010
Fitting complex joints in trim and paneling can be easier than it looks if you have a few simple tools.
August 18, 2010
A pencil and a scrap of wood are all the tools you need to mark molding before cutting it to fit flush with an uneven surface.
July 30, 2010
Cover all of your framing with housewrap, but watch this video before you cut through to install your windows.
July 14, 2010
Building Skills: Moisture control the right way.
Subscribe to Fine Homebuilding magazine now and save up to 52%
© 2018 The Taunton Press, Inc. All rights reserved.
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 52%