Anyone know where I can locate a 15/16″ twist drill bit with at least an 8″ flute? 1/2″ chuck. I would be eternally grateful.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding is excited to be the official media partner of the 2024 Building Science Symposium series! This event offers builders, tradesmen, architects, designers and suppliers to discuss topics ranging…
Featured Video
How to Install Cable Rail Around Wood-Post CornersHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I'd start with McMaster-Carr
http://www.mcmaster.com
Then try MSC
http://www.mscdirect.com
Thats all I got right now.
Spheramid Enterprises Architectural Woodworks
Repairs, Remodeling, Restorations
Yes! Thank You!!http://www.mcmaster.com/#2464a31/=4gqyp9
Edited 11/11/2009 11:21 pm ET by gb62