I am looking for a source for the Atlanta Area for cabinet doors as I make built-ins and run trim and have been asked to resurface two kitchens. I build my own Craftsman style doors and have made raised panels, but I only have these two styles. I need several raised panel options and making them myself will take too much time from other work. Any suggestions?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Learn how to plan, fabricate, and install a chute to conveniently send your dirty clothes from an upstairs bathroom or hallway to your laundry room below.
Featured Video
How to Install Cable Rail Around Wood-Post CornersHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I use Walzcraft for all my doors and drawer fronts. I've been very pleased with them. They aren't in Atlanta, but they do ship.
Another option, if you are looking at using a local shop, is to check out the Cabinet Makers Association. You can find local shops by clicking on the link on the home page.
Mitch
http://www.rdwoodworks.com
http://www.freewebs.com/glenndalepedalplane/
Thanks for the lead. I'll give them a call.
I've had good luck with Scherr's
http://www.scherrs.com
Thanks for your source too. I was using a local cabinet shop a couple of years ago and like alot of others in this market, he went out of business. I was paying $21.00 a foot in width, didn't matter about height of doors for poplar or basswood raised panels, unfinished. Is that reasonable or can I do better? Looks like we are starting to make a recovery, but at my age, it won't come soon enough to fully recover. Thanks for your help.
Here's my last quote, let me know if this makes sense. In a nutshell, I had fifteen doors in five different sizes. If you go through their catalog, you can find it. It's fairly intricate. I can get a picture later if you want it. Hope this helps.
joe
=====================================================CHERRY IP: WATERFALL NO HINGE Edge: L - No Finish====================================================Item Size (W x H) Qty Sq Ft $ Each Line Total---------------------------------------------------------------------------------------------------------
940 DOOR - WATERFALL RAISE
6 @ 19 1/16 x 15 1/4 2.22 $86.60 each$519.60 total
2 @ 17 1/2 x 15 1/4 2.00 $79.50 each$159.00 total
1 @ 17 1/2 x 23 1/23.00 $111.75 each$111.75 total
4 @ 14 11/16 x 23 1/22.50 $95.63 each$382.52 total
2 @ 36 1/2 x 11 5/83.08 $114.33 each$228.66 total
------- ------------Total: 15 Style Sub-Total: $1,401.53
============Total Number Of Pieces: 15 SqFt: 36.48 Door Order Sub-Total: $1,401.53( 0.15 ) Job Discount: - $210.23Discount Sub-Total: $1,191.30BOXING CHARGES: $56.06============Order Sub-Total: $1,247.36SHIPPING: $82.28SUMMER SALE: -$178.69============
TOTAL DUE: $1,150.95