Replies

1. 
   DDay | Jan 30, 2006 05:14am | #1

   Do a search through the back issue of FHB, there have been a few articles in the past few years.  Also, try doing an advanced search through JLC, http://www.jlconline.com/cgi-bin/jlconline.storefront

   You could also pick up Gary Katz's trim book from your library.  http://www.garymkatz.com/Publications-T1.htm

1. 
   grayhawk | Jan 31, 2006 03:28am | #5

   /DDay, thank you for your reply.

    

   Grayhawk

2. 
   McDesign | Jan 30, 2006 05:24am | #2

   Both of these were pretty straightforward -

    

   This one is done in drywall over 2x material

   http://forums.taunton.com/tp-breaktime/messages?msg=67772.5

    

   This one is done with a wood grid

   http://forums.taunton.com/tp-breaktime/messages?msg=68260.1

    

   Forrest

1. 
   grayhawk | Jan 31, 2006 03:28am | #6

   McDesign, thank you for your reply.

   Grayhawk

3. 
   JDRHI | Jan 30, 2006 06:08am | #3

   FHB had a short peice on "how to" a little while back.....maybe late '04?

   Don't have the issue handy.....but I know its out there.

   J. D. Reynolds

   Home Improvements

1. 
   FastEddie | Jan 30, 2006 07:11am | #4

   JLC had a nice article about 2 yrs ago, how to build it with pre-fab boxes.  I sort-of followed the article, and it was not difficult.

     

   "When asked if you can do something, tell'em "Why certainly I can", then get busy and find a way to do it."  T. Roosevelt

1. 
   grayhawk | Jan 31, 2006 03:30am | #8

   FastEddie, thank you for your reply,

   Grayhawk

1. 
   FastEddie | Jan 31, 2006 05:50pm | #9

   You trying to run up your message count to match Piffin?  Seriously, one post with a  thanks to all who posted is sufficient.

     

   "When asked if you can do something, tell'em "Why certainly I can", then get busy and find a way to do it."  T. Roosevelt

2. 
   grayhawk | Jan 31, 2006 03:29am | #7

   JDRHI, thank you for your reply,

   Grayhawk