*
I am looking for some stainless steel counter top edging like the type popular in the 50’s. Does anyone have any leads, I’ve used up my local contacs and everyone has drawn a blank. Thanks Skip
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding is excited to be the official media partner of the 2024 Building Science Symposium series! This event offers builders, tradesmen, architects, designers and suppliers to discuss topics ranging…
Featured Video
How to Install Exterior Window TrimHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
Skip - I don't know where you are but if it was here I would ask someone at Outwater.
Jeff
*Skip, For film work i have been able to get a very similar profile in the bath section of more than 1 local bldg. supply. In real world stuff I have been able to order from my cabinet hardware supplier. I once did a a store with about ( Guessing ) 2000' of the stuff
*Skip - You're not the only one looking. Wait a minute, look what I found! (look under Georgica Butler's Pantry).
*Now I also want some. In that photo it looks like they've even got that little cove piece that goes back there in the corner.
*Here is some http://www.cornerhardware.com/hardware/Hardware/Stair_Counter_Nosings-1250.htmlAnd in aluminumhttp://www.studiosupplier.com/aluminum.html
*Jeff and Bill, Appreciate the info, looks promising. Linda Burkhardt sure does some impressive work. thanks Skip
*The trick now, Skip, is to find out WHO really does her work.
*
I am looking for some stainless steel counter top edging like the type popular in the 50's. Does anyone have any leads, I've used up my local contacs and everyone has drawn a blank. Thanks Skip