i have a prehung 80in door and the rough opening is plumb. and the jamb is plumb and shimed.so why do i have a uneven gap between the head jamb and the top of the door.from the top of the hinge side to the top of the latch side,the gap gets wider up to 5/16 {between the head jamb and top of the door} does anyone have a solution for this. thanks.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Michael Hindle explores the efficacy of deep energy retrofits and discusses essential considerations for effective climate mitigation.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.