Replies

1. 
   CJD | Apr 17, 2006 06:55pm | #1

   I think the Watts IntelliFlow is a better solution for washing machines.

   http://www.watts.com/pro/divisions/watersafety_flowcontrol/learnabout/learnabout_intelliflow.htm

2. 
   Shacko | Apr 17, 2006 08:35pm | #2

   Washers on second floors should have a drain pan tied into a point of discharge. Washers should be shut off after every use; [you can buy a dual shut-off made for that purpose]. I think that you should have all three. Your call.

1. 
   todd | Apr 17, 2006 09:52pm | #3

   CJ,
   Thanks for the link, looks a little more sophisticated...need to study the info some more.Shacko,
   Well, I was planning on putting the washer in a pan plus the floodstop. One outta three on your list. Manually turn off the valves when leaving for awhile, though... Here's the reason for not wanting a drain. Washer sits in a tight space. Don't want to relocate. If I put a pan under it and plumb in a drain line I'm worried about getting it out of the pan when my SO "White Tornado" goes into her cleaning frenzy. Am I missing something?Thanks guys,Todd

3. 
   timkline | Apr 17, 2006 10:40pm | #4

   the Floodstop is good, but the Watts electric valve CJD mentioned is really a great idea.

   the problem is that when the hoses go, they usually split or go at the ferrulle which causes major side spray which isn't always caught by the Floodstop pan.

   the electric Watts valve however prevents that. 

   i have installed the Watts valve with the drain box accessory.  very nice.

    

    

   carpenter in transition

1. 
   todd | Apr 17, 2006 10:47pm | #5

   Appreciate your input. Got the recessed box too, seems simple enough to add the shut off.Todd