I’m ready to build my shop and money is a problem. so I decided to build a 16’x24′ shop on skids. my problemm is, is this going to be o.k. and how can I insulate the floor. I was hoping to use 4×4 skid with 2×6 floor joists with tounge and groove plywood on top of the 2×6
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story

Zoning ordinances attempt to tackle housing shortages and affordability by allowing designs that increase density, but with new regulations come some challenges.
Featured Video
SawStop's Portable Tablesaw is Bigger and Better Than BeforeHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
Post this on Breaktime and you'll get lots of responses.