*
Anyone have a good reference for interior trim in the arts and crafts/ craftsman style. I am considering a new project for myself and am looking for a book that gives a good view of this style. Mostly interior, but exterior would be helpful as well.
Thanks,
Dan S.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
There are a number of ways to achieve a level foundation and mudsill.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
How to mitre corners for crow molding for interior trim???????
*?? Measure the angle, turn the crown over (ie: ceiling side down), and cut exactly half the angle you measured on the two pieces you want to join. I use biscuits, because it's easier.
*DanI don't know of any source that realy shows A&C trim. But here are a couple of places to get some ideas."Craftsman-Style Homes, Fine Home building Great House" series."More than One Way to Case a Window" FHB #98 or reprinted in "Finish Carpentry, Best of FHB".There also the magazines "Sytle 1900" and "American Bunglow".And there are many, many books on these homes. Do some looking at the library for Arts and Crafts, Craftsman, Parrie Sytle, Greene and Greene, Bungalow, Stickly, etc.
*THANK YOU, THAT WILL BE QUITE HELPFUL. DAN S.
*
Anyone have a good reference for interior trim in the arts and crafts/ craftsman style. I am considering a new project for myself and am looking for a book that gives a good view of this style. Mostly interior, but exterior would be helpful as well.
Thanks,
Dan S.