There is a factual error in this Kapex video by Justin Fink. He states that the saw blade cannot be lowered to the cutline without first depressing both buttons, hence having to power up the saw first. This is not correct, if you slightly depress the lower button without depressing the top button, this will allow the blade to be lowered to the cutline. This, obviously is needed when using the saw outside in bright sunlight and when the laser lines are useless.
Wayne
Edited 7/22/2008 3:52 pm ET by waynew
Replies
Just a bump so you'll see this...
Thanks Boss. It's a good point, something I was familiar with, and probably something that should have been mentioned in the video.Justin Fink - FHB Editorial