*
I’ve got a circular 4’dia. double insulated aluminum framed window installed in my house, new construction although it’s at the finish drywall stage. The window frame is a typical narrow aluminum unit which leaves approx 4″ worth of space between the frame and the outer edge of the drywall to case and trim. I’ve seen a prefab unit on the net, consisting of the circular finish moulding and the inner casing or sill all together in one piece that should slide in the opening, align/fasten/caulk kind of thing. But for the life of me I can’t remember where I found it. I’ve checked marley, canamould, etc… Can anybody help? The drywall guys have made a friggin’ mess out of it as it stands and I really want to get a drop in unit to slide in and be done with it. Any help would be very much appreciated.
Bill Smith
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
The Portascanner uses ultrasonic technology to isolate the smallest air leaks, making it easier to air-seal an enclosure.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
*
I've got a circular 4'dia. double insulated aluminum framed window installed in my house, new construction although it's at the finish drywall stage. The window frame is a typical narrow aluminum unit which leaves approx 4" worth of space between the frame and the outer edge of the drywall to case and trim. I've seen a prefab unit on the net, consisting of the circular finish moulding and the inner casing or sill all together in one piece that should slide in the opening, align/fasten/caulk kind of thing. But for the life of me I can't remember where I found it. I've checked marley, canamould, etc... Can anybody help? The drywall guys have made a friggin' mess out of it as it stands and I really want to get a drop in unit to slide in and be done with it. Any help would be very much appreciated.
Bill Smith