I am in the process of relocating my propane tank to another side of the house and will add about 80 feet of additional run (new yellow burrined plastic line) to get to the house. My current useage is two gas furnaces, two water heaters, and one gas range. Very seldom are both furnaces running together (80KBTU or less each). Do I need to go to a 1 inch line due to the added distance or do you think the 3/4 line will suffice?
Thanks
Replies
do you have a HP regulator on the tank and a LP regulator on the house or just a LP regulator on the tank???
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming
WOW!!! What a Ride!
Forget the primal scream, just ROAR!!!
Just a LP on the tank.
THanks
what is the total run length of line???
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming
WOW!!! What a Ride!
Forget the primal scream, just ROAR!!!
From tank to House (new line) about 80-90 feet. From one end of house to the other about 100 feet. About 200 feet total.
Thanks
Here is a very useful link for sizing propane lines. Roger
http://www.engineeringtoolbox.com/propane-gas-pipe-sizing-d_827.html
Perfect!
Thanks
see about doing dual regulators...
HP/LP... 3/4 line...
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming<!----><!----><!---->
WOW!!! What a Ride!Forget the primal scream, just ROAR!!!