*
I am currently renovating an old house (140 yrs. old) and am interested in retrofitting the existing 2 over 2 double hung windows to a modern jamb system. The windows currently have sash weights which I would like to eliminate in an effort to better insulate the openings. The sashes are made of 1 1/2 inch thick wood and I have been unable to find anyone that manufactures jamb conversion kits in any sizes other than 1 3/8 inches thick. Has anyone come across a source for these kits for thicker jambs? (or does anyone have another way to solve this problem?)
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
A standardized approach, quick-to-install hardware, and a simplified design make building custom casework cost-effective.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
I am currently renovating an old house (140 yrs. old) and am interested in retrofitting the existing 2 over 2 double hung windows to a modern jamb system. The windows currently have sash weights which I would like to eliminate in an effort to better insulate the openings. The sashes are made of 1 1/2 inch thick wood and I have been unable to find anyone that manufactures jamb conversion kits in any sizes other than 1 3/8 inches thick. Has anyone come across a source for these kits for thicker jambs? (or does anyone have another way to solve this problem?)