my rousseau tablesaw stand has dinples on the front rail. it appears when the fence handle is pushed down , to lock the fence, it is dimpleing the front rail. has anyone noticed this. there is no tension adjustment on the fence. anyone had this happen. the dimpleing causes the fence to not lock on the front rail.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
There's a constant source of clean water for you to use, and all you have to do is collect it.
Featured Video
How to Install Exterior Window TrimHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
There are two set screws on the fence that control both square-ness and tension. My Rousseau has been used and abused for 12 years--the paint is gone, but no major dimpling.
thanks for the info, ill contact rousseau. i had an older one and no dimpleing.
Sounds exactly like my wife's thighs.
Trade in time.
Spheramid Enterprises Architectural Woodworks
Repairs, Remodeling, Restorations
You gonna play that thing?
http://www.youtube.com/watch?v=32Ln-SpJsy0
There should be a metal flapper between the cam and rail to prevent that.
thanks , the flapper is there, maybe it came like that.