Follow the Fine Homebuilding Podcast on your favorite app. Subscribe now and don’t miss an episode:

This week’s podcasts are from the 2019 International Builders’ Show in Las Vegas, Nevada.

Rob Wotzak and Matthew Millham talk with Matt Minchew from Huber Engineered Woods about challenges with creating a strong sheathing system and then wrap up the builders’ show with their favorite finds. Matt got the name of the joist reinforcer product from Metwood Building Solutions incorrect. Here’s a link to the real manufactuer www.metwood.com.

This episode of the podcast is brought to you by Huber Engineered Woods. Visit HuberWood.com.

Here are some of Rob and Matt’s favorites from the show…

 

View this post on Instagram

 

This might be the most fun find @mike_guertin made at #ibs2019: the Laundry Jet. @laundryjet works basically like those tubes at the bank that suck canisters of cash, but instead move your sweaty socks and dirty towels to the laundry room. Top-of-the-line version is motion activated, turning on the unit and opening the chute to accept the laundry, then turns off and dumps the load once full. Uses 6 in PVC as a laundry chute, and one unit can handle multiple rooms.

A post shared by Fine Homebuilding Magazine (@finehomebuilding) on Feb 21, 2019 at 2:37pm PST

 

 

View this post on Instagram

 

@tooltribe is kind of like Airbnb for tools. Have a tool just sitting around? Rent it out. Need a tool you don’t have? Find someone who does with the Tool Tribe app. @mike_guertin found these guys at #IBS2019, and it’s one of his favs. #keepcraftalive

A post shared by Fine Homebuilding Magazine (@finehomebuilding) on Feb 21, 2019 at 1:53pm PST

 

 

View this post on Instagram

 

@mike_guertin found what have be the smoothest-sliding doors at #ibs2019: Maglev Glide @maglevglide uses rare-earth magnets to levitate their doors, so they slide easily and quietly. In addition to this one, they also have a barn door version. A big perk of the design is it won’t get gummed up with debris that can make your barn-style door harder and harder to close over time. And there’s nothing to lube. #ibs2019 #keepcraftalive

A post shared by Fine Homebuilding Magazine (@finehomebuilding) on Feb 21, 2019 at 2:24pm PST

 

 

View this post on Instagram

 

Run cable? Then you might want to check these out. Utility Shield @utilityshield protector plates can be inserted into holes drilled through framing to protect electrical and other cables from damage. @mike_guertin likes how they can be installed before or after you run the cable, and that cut down on labor of traditional protector plates, which go on both sides of the wall to protect cables from drywall screws and other fasteners. #ibs2019 #electricians

A post shared by Fine Homebuilding Magazine (@finehomebuilding) on Feb 21, 2019 at 2:04pm PST

---

Keep Craft Alive and Keep on Trucking

Support the trades when you buy a #KeepCraftAlive trucker hat or t-shirt.

 

---

We hope you will take advantage of a great offer for our podcast listeners: A special 20% off the discounted rate to subscribe to the Fine Homebuilding print magazine. That link goes to finehomebuilding.com/podoffer.

The show is driven by our listeners, so please subscribe and rate us on iTunes or Google Play, and if you have any questions you would like us to dig into for a future show, shoot an email our way: [email protected]. Also, be sure to follow Justin Fink and Fine Homebuilding on Instagram, and “like” the magazine on Facebook. Note that you can watch the show above, or on YouTube at the Fine Homebuilding YouTube Channel.

The Fine Homebuilding Podcast embodies Fine Homebuilding magazine’s commitment to the preservation of craftsmanship and the advancement of home performance in residential construction. The show is an informal but vigorous conversation about the techniques and principles that allow listeners to master their design and building challenges.

 

Other related links

• All FHB podcast show notes: FineHomebuilding.com/podcast.
• #KeepCraftAlive T-shirts support scholarships for building trades students. So go order some shirts at KeepCraftAlive.org.
• The direct link to the online store is here.