How to Make Stepped Corbels With a Router Jig
A strip of scrap wood and a couple of router bits simplify the process of shaping the parts for these decorative wooden brackets.
To create the template for the corbels’ smaller side pieces, Striegler starts by duplicating the first template. First he traces the original template’s outline on another piece of MDF, then he cuts away most of the waste with a jigsaw and finishes up with a flush trim bit.
Then he removes the lip using a flush trim bit. What’s left is a template that steps back exactly 3/8 in. from the original. Each template creates two corbel parts.
Set a tablesaw to the depth the corbels will project from the mantel and cut the parts free from the stock.