Videos in the Series

• 

  Drying in a Roof with ZIP System: Introduction and Panel Installation

  In this Shop Class video series, builder Tony Blue demonstrates how to sheath a newly framed roof and make it weathertight using ZIP System sheathing and tape.

• 

  Drying in a Roof with ZIP System: Taping the Field

  Builder Tony Blue demonstrates how to properly tape sheathing panel seams with ZIP System Flashing Tape.

• 

  Drying in a Roof with ZIP System: Valleys

  Learn how to apply ZIP System Flashing Tape to valleys on sheathing panels to ensure a tight, dried-in roof.

• 

  Drying in a Roof with ZIP System: Roof-To-Wall Transitions and Corners

  Learn how to properly tape roof-to-wall transitions using ZIP System Flashing Tape on side walls, end walls, and inside and outside corners.

• 

  Drying in a Roof with ZIP System: Ridge and Penetrations

  Builder Tony Blue demonstrates how to seal roof ridges and plumbing-vent penetrations with ZIP System Flashing Tape.

• 

  Drying in a Roof with ZIP System: Roof Edges

  Builder Tony Blue finishes off the dry-in process by installing ZIP System Flashing Tape at the eaves.