Stop Drafts With a Drop-Down Door Seal
This hidden mechanism retracts when the door is open and eliminates the need for a bulky threshold.
Magazine extra: Watch carpenter Jay B. Lane use a specialty weatherstripping tool to seal a door.
As a custom-door and window installer, I always include weathersealing as part of the job. This final step not only improves comfort and energy performance, but it also shields the home’s interior from wind-driven water, insects, and street noise.
While the weathersealing around the sides and at the top of a door is straightforward, I find that sealing an exterior door at the threshold can be tricky. In most cases, I use an interlocking threshold with a water pan underneath and a rubber silicone bead kerfed into the bottom of the door. However, this approach still leaves a visible metal threshold.
For a seamless transition between interior and exterior spaces, I use an auto-drop threshold seal. It’s an adjustable device with a neoprene seal that retracts when the door is opened to allow for a hidden weatherseal. When the door closes, the door jamb depresses a pin on the hinge side of the door. This action engages a leaf spring inside the mechanism, allowing the neoprene seal to drop into place. I use a Pemko automatic door bottom (www.pemko.com) because of its reasonable price ($35) and its solid assembly.
A hidden auto-drop seal won’t work for every door configuration. The stiff aluminum bar crimped to the neoprene bumper needs a fairly flat surface to seal against. Large gouges or dips and undulations in the floor or threshold below the door cause a gap in the seal. Also, the bottom of the door must be within 1⁄2 in. of the threshold. If the door needs to pass over a thick rug, the threshold can be built up to allow the bottom of the door to be higher. This seal is not recommended…