A Buyer’s Guide to Windows
They’re one of the most important—and expensive—parts of a house. We help you sort through the materials, styles, and ratings that will influence your choice.
When you roll up to a house for the first time, you can’t help but notice the windows. Their size, style, and placement determine if they’re appropriate to the architectural style and, to some degree, if the house will be a pleasure to be in.
For most people, that’s as much thought as they give to windows. And that’s too bad, because picking the right windows can lower heating and/or cooling costs, improve comfort inside the house, and improve indoor-air quality by dramatically limiting condensation.
To buy the best-performing windows for your house, though, you need to know a bit about how they work and what they need to do.
A window has four basic jobs
The first thing a window has to do is control heat gain and loss. Technically, these temperature changes take place through conduction, convection, and radiation. As a practical matter, these temperature changes affect your comfort. If you’re sitting next to a window, you’ll experience conduction and convection when the glass acts as a cold radiator in the winter; and you’ll experience radiation on a sunny day when you feel like an ant trapped under a magnifying glass.
Second, a window must control solar-heat gain. I say control because heat gain isn’t always bad. If you live in a heating climate — generally speaking, anything north of Oklahoma with the exception of California — you should take advantage of the free heat windows can provide.
Third, windows need to regulate airflow. They should be airtight when closed and also offer fresh air when you want it. Finally, windows provide natural light and frame views both near and far.
What makes a good frame?
When most people choose windows, they begin by considering the frame material. They might be predisposed to traditional wood or low maintenance vinyl. However, according to Nils Petermann at the Efficient Windows Collaborative, the most important factor to consider is the frame’s durability. This is where I’d like to refer you to an independent organization that provides unbiased durability ratings for window frames. Unfortunately, there isn’t one.
You can make educated guesses about durability based on the frame material. But whether it’s wood, vinyl, fiberglass, aluminium, or clad, a well constructed window lasts longer and performs better than a poorly constructed one regardless of the relative benefits of its frame material.
The best way to get a sense of window quality is to read all the product literature you can get your hands on and to look at actual windows — a lot of them. Go to the big-box store and the local building supply, and open and close the windows on display, paying attention to how the corners are joined, how well the sashes seal, and how rigid the unit is.
On vinyl windows, look for continuous thermally-welded corners. Examine the corner cutaway displays of aluminum windows for a continuous thermal break in both frame and sash. On a clad window, the cladding should have well-sealed corners and gaskets to prevent water from getting behind the cladding. Aluminum is an excellent heat conductor, so be sure that aluminum cladding doesn’t contact conditioned interior air at any point.
Another way to sift through the options is to talk to reputable builders and architects in your area. Ask what windows they use and how long they have been using them. They won’t stick with windows that make their clients unhappy.
Thirty years ago, when single-pane windows were the rule rather than the exception, companies looking to improve window performance focused their research on insulating glass. It was the lowest-hanging fruit. They’ve done such a good job that the R-value of insulated glass is good enough to make the window frame the weak link in the thermal chain. That’s one reason why manufacturers list performance data for relatively large windows, say, 4 ft. by 5 ft. (When you’re comparing windows, make sure the performance data are for windows of the same size.) Windows with large areas of glass yield better performance numbers because the frame is a smaller percentage of the window area. Savvy window designers understand this and tweak their windows accordingly for optimal performance. By using strong materials that permit low-profile sills, sashes, and jambs, they minimize the size of the conductive frame while being sure to incorporate materials that reduce air leakage.
Frame material can also influence how long a window stays airtight. Like most building materials, windows expand and contract with changes in temperature and humidity. When you see a window with moisture between panes, it’s likely that movement between the glass and the sash broke the insulating seal. By choosing stable materials, you can reduce stress on the seal and increase the window’s longevity. Fiberglass expands at the rate of glass, while aluminum and vinyl expand respectively 3 times and 7 times more than glass. Wood moves in response to humidity changes rather than temperature.
Insulated glass reduces heat loss
Manufacturers typically refer to glass as glazing. Using glazing as a noun is a bit pretentious, like referring to a window as a fenestration, but it does give the sense that glass assemblies in today’s windows are a far cry from the single-pane windows installed in the 1970s.
Those single-pane windows have been abandoned in most heating climates because glass is a horrible insulator. A standard window today relies on an insulated glass unit (sometimes called an IG). This unit is a sealed sandwich of two or three pieces of glass with an airspace between the panes. IG units are manufactured by a handful of glass companies that supply the hundreds of window manufacturers in North America.
The airspace between glass panes, usually 1⁄2 in. to 2⁄3 in. thick, serves as insulation by reducing the transfer of heat through conduction. A single clear pane has a U-factor of 1.04, but a sealed double-pane unit has a U-factor of 0.5 (see “What’s a U-factor?” right). Adding a third pane improves the U-factor to 0.3.
Replacing the air with gas improves the insulating value of the window. Manufacturers use argon or krypton gases because they’re inert—chemically stable and nonreactive—and because they reduce heat loss, as they are less conductive than air. Argon and krypton also reduce convective losses because the gases are heavier than air, reducing gas movement within the insulating space.
Krypton performs slightly better than argon, but its bigger advantage is that the optimal spacing between krypton-filled panes is narrower than what’s required for argon. That means less stress on the sashes, particularly in triple-pane windows.
Spacers are potential weak points
Spacers between glass panes perform three functions: They maintain a uniform separation between pieces of glass, they provide a good adhesive surface for the glass, and they create an airtight seal for the insulating cavity.
Although you should choose windows based on their overall performance ratings, the spacer, while small, substantially impacts a window’s U-factor and condensation resistance.
The spacer’s job is complicated by the fact that it’s in contact with both the inside and outside surfaces of the window, forming a bridge between indoor and outdoor environments. Because the spacer is more conductive than the air or gas fill, it changes the temperature of a 21⁄2-in.-wide band around the edge of the glass. As a consequence, the window’s overall U-factor is affected. In smaller windows, the 21⁄2-in. temperature band is a larger percentage of the window and has a greater effect on the window’s U-factor. While spacers can be considered the Achilles’ heel of all windows, a casement window performs slightly better than a double-hung of the same size because the former has less spacer area. Likewise, the thermal performance of true divided-lite windows made up of multiple IG units suffers because of all the spacer area in the window. (Simulated divided lites can also affect U-factor if the grille creates a thermal bridge between the panes.)
Spacers are made of aluminum, steel, fiberglass, foam, and thermoplastics, often in some combination. Foam spacers have the lowest U-factor, while aluminum has the highest. Today, quality windows use “warm-edge” spacers. (It’s worth noting that warm-edge means only that it’s less conductive than aluminum.) A good warm-edge spacer raises the interior surface temperature of the glass along the perimeter of the window. This is especially important at the window’s bottom edge, which is most subject to condensation. At 0°F outside, a good spacer increases the temperature at the bottom of the inside glass pane by 6°F to 8°F. As a result, a more comfortable relative-humidity level indoors is possible during the winter without window condensation.
Coatings improve performance
Energy-efficient windows were developed during the previous energy crisis. When Jimmy Carter was installing solar panels on the White House and making conservation a priority, the Department of Energy’s Lawrence Berkeley National Laboratory was charged with finding ways to conserve energy. Windows were among their targets. The insulating windows of that era allowed an inordinate amount of heat to escape. The lab’s scientists concluded that by using existing technologies to deposit a virtually invisible metal or metal-oxide coating on the glass, insulating windows could be dramatically more efficient. This coating is transparent to visible light, but blocks long- and short-wave radiation by reflecting it. Known as a low-e (for low-emissivity) coating, it’s common today even on low-cost windows.
Depending on the nature of this thin coating and which window surface it is applied to, the coating can reflect heat back into the room to conserve it or filter sunlight to keep heat out. Using a coating on two different glass panes can fine-tune the amount of heat that’s retained in each direction.
The measure of the amount of the sun’s heat a window lets through is the solar heat gain coefficient. SHGC in shorthand, it ranges from 0 to 1, where 1 is uninterrupted heat gain. A clear-glass, two-pane insulated window has an SHGC between 0.56 and 0.68, depending on the frame material and construction. The size of the air gap, which is influenced by frame design, and the amount of light blocked by the frame and grille affect the SHGC.
Films create super windows
Another way to control the flow of heat through a window is with suspended films. These films come in two varieties: high solar gain and low solar gain. Because these films (similar to mylar) are so lightweight and thin, as many as three films can be suspended between two glass panes. The additional insulating spaces increase the insulating ability of the window, replicating the performance of three-, four, or five-pane windows without the weight. Serious Windows
uses this approach to create high-performance windows with both high and low solar-gain properties. The company’s premium fixed window has an insulating value of R-11.1 (U-factor 0.09), nearly rivaling many wall insulations. The operable version of the window is R-7.1 (U-factor 0.14). Considering that the average insulating window is the equivalent of R-1 to R-3, Serious Windows live up to their name.
Let the light shine in
Solar gain and insulating values aren’t the only ways that windows save energy and keep you comfortable. Windows also control the view and the amount of natural light. Daylighting, or window-placement strategies to maximize natural light, save money by reducing the need for electric lighting. Although placement is a design issue, window styles and glass properties
affect the amount of light infiltration. The visible transmittance (VT) rating on the National Fenestration Rating Council’s (NFRC) label (see p. 77) allows you to compare the amount of light that passes through windows, taking into account the light blocked by frames and grilles.
Impact-resistant glass offers protection
Although they don’t affect a window’s energy performance, a handful of options can make you safer. Tempered glass, for example, can be specified for windows located where someone could potentially fall into one. Many of these locations are covered by code and include windows within 18 in. of the floor, next to doors, in showers or bath areas, and along decks, patios, and walkways.
If you live in a coastal area particularly along the Atlantic and Gulf coasts, where building codes demand protection during hurricanes or in a tornado-prone area, you can specify impact-resistant glass. Using the same technology as car windshields, a plastic sheet is laminated between two pieces of glass so that the window maintains its integrity after the glass is broken.
Window frames can also be reinforced to withstand impact. Available in three different strengths (impact zones 2, 3, and 4), the toughest windows in impact zone 4 must withstand strikes from at least two 8-ft.-long 2x4s traveling at 50 ft. per second, followed by 9000 cycles of negative and positive pressure simulating hurricane force winds.
Windows that keep the world at bay
Manufacturers also offer variations of pebbled, frosted, and wavy glass that add privacy to bathrooms, bedrooms, and other sensitive spaces.
If you live near a busy road, near train tracks, or under a flight path, acoustic windows can take the edge off loud or constant noise. Even if they don’t readily advertise the fact, many window companies sell sound-attenuating windows. Residential “quiet” windows are likely to be rated with a sound transmission coefficient (STC). A typical double-pane window has an STC of 25 to 27. Every increase of 10 in the STC cuts the amount of sound transmitted by half. Companies such as Milgard, Atrium, Marvin, and Serious Windows have windows in the 40 to 47 STC range.
Self-cleaning windows reduce maintenance demands
For those of you who say, “I don’t do windows,” technology has finally caught up with your sentiment. Several big glass companies market coated glass that resists the buildup of dirt. Product names include Neat Glass by Cardinal, Activ by Pilkington, and PPG’s SunClear.
By making the glass smoother and hydrophilic, rainwater collects in sheets on the surface and slides off the glass quickly, cleaning the window. Some windows include a titanium-dioxide layer that reacts with UV-light to help organic materials decompose, so dirt washes away more easily.
Frame materials dictate performance, maintenance, and cost
Aluminum frames are strong, durable, inexpensive, and require little maintenance. However, they are available in limited colors, and aluminum is highly conductive. To achieve even modest insulating levels, the frame and sashes must be carefully engineered with thermal breaks. Even then, they are best in mild desert climates or on impact-resistant windows in hurricane zones.
The only choice for some traditionalists, wood offers your pick of colors (and it can be changed later on). Wood frames are moderately priced and have good insulating value and structural strength, but they’re not low maintenance; they require periodic cleaning and painting, which adds to their overall cost.
Windows with aluminum-, vinyl-, or fiberglass-clad wood frames are the most expensive. A clad unit offers the low-maintenance durability of aluminum, vinyl, or fiberglass on the outside, and the thermal resistance and appeal of wood on the inside. Well-engineered aluminum cladding should strengthen the window. Custom colors for aluminum cladding can match any paint chip at an additional cost.
Vinyl frames are formed of extruded PVC. Multiple chambers in the frames and sashes add rigidity. These chambers also act as insulation in the same way as the airspace between glass panes; some manufacturers fill the chambers with foam insulation to improve the frame’s insulating ability. While it’s typically the least expensive window, vinyl is available in only a handful of colors, generally white and some variation on almond. Darker colors absorb too much heat, causing vinyl to deform and degrade.
The best you can get if you want to maximize a frame’s insulating ability, fiberglass is the least conductive material, and the frame can be insulated with foam. More expensive than aluminum, vinyl, or wood, fiberglass requires little maintenance and is durable and extremely strong. It can be extruded in low-profile frames and sashes in several colors and is paintable. Another advantage is that as the temperature changes, fiberglass expands and contracts at a rate almost identical to the glass. This helps to prevent seals along the glass from failing.
Windows need to insulate
Sealed airspaces improve insulation. The more insulating spaces in the glass unit, the better the performance; triple-glazed windows are among the most energy efficient you can buy. Aluminum, vinyl, and fiberglass frames use extruded chambers both for strength and as a thermal break. Filling these cavities with foam provides additional insulation. Solid-wood frames are about as efficient as vinyl.
The NFRC label by the numbers
U-factor A measure of the insulating value. U-factor is the nonsolar heat flow through all parts of the window (glass, frame, and sash). A lower number means better insulation and greater performance.
Visible transmittance (VT) A measure of the amount of visible light that passes through the window. Values range from 0 to 1 (a higher number equals more light). However, most ratings are between 0.3 and 0.8 because they take into account the light blocked by the frame. Choose windows with higher VT to maximize daylight and views.
Condensation resistance A relative scale from 0 to 100 based on the window’s properties. It predicts the likelihood of condensation, with higher numbers indicating less condensation.
Solar heat gain coefficient (SHGC) The percentage of the sun’s solar heat that passes through the window. Higher numbers mean more passive solar-heating potential.
Air leakage (AL) A measure of the amount of air passing through the window assembly; a source of heat gain and loss. This optional rating is expressed in cubic feet per minute through a square foot of window. Look for ratings under 0.3; lower is better.
What’s a U-factor?
U-factor rates a window’s insulating properties by measuring the flow of nonsolar heat through the window. You can think of it as the rate of conduction; the lower the U-factor, the less heat will flow through the window. (U-factor is the reciprocal of the more familiar R-value used to rate insulation. R-value measures resistance, so higher numbers are desirable.) Although we tend to think of a window as primarily glass, the frame makes up 20% to 30% of the unit.
U-factors are measured for the edge of the glass area, the center of the glass area, and the frame; but the important U-factor is for the entire window unit. Buying decisions should be based on this number, which appears on the NFRC label (above). U-factors for operable windows range from 0.14 for a super-insulating suspended-film unit to 0.5 or so for a basic double-pane window from a big-box store. Lower U-factors correlate with higher prices.
Double-hung Traditional window composed of two sashes that slide vertically. A single-hung window looks identical, but the top sash is fixed.
Pros: Available with a wide variety of grille patterns to match different architectural styles. Sashes usually tilt in for easy cleaning of the exterior.
Cons: Sashes rely on draftier sliding-style weatherstripping. The bottom edge of the upper sash is exposed to outdoor temperatures on two faces, increasing surface area for thermal bridging. Two sashes increase spacer area, increasing U-factor. Less than half the window area can be open for ventilation.
Awning Top-hinged window that usually opens outward with a crank.
Pros: Good-sealing compression-style weatherstripping. Single glass unit and recessed sash improve U-factor. Provides ventilation while it’s raining. Often used above and/or below large fixed windows for ventilation and additional daylight.
Cons: Screen on inside of window. Open window can present a hazard if installed along a walkway, deck, patio, or porch.
Tilt-and-turn Dual-action window that can swing in like a door or tilt from the bottom like a hopper window for ventilation.
Pros: Ventilation options. Secure multipoint locking. Compression weatherstripping. Large egress area and easy cleaning.
Cons: Shades and drapes can interfere with operation.
Casement Side-hinged window that usually opens outward with a crank. In-swing versions are available.
Pros: Compression-style weatherstripping. Single large glass unit and recessed sash improve U-factor. Largest ventilation area of any window style. Opening can be oriented to “scoop” prevailing breeze.
Cons: Screen on inside of window. Hinge design might not allow outside of window to be cleaned from inside. Open window can present a hazard if installed along a walkway, deck, patio, or porch.
Horizontal slider The two sashes slide past one another on tracks like a sliding patio door.
Pros: Can be easier to open than other sliding styles, especially when placed over a counter.
Cons: Sliding weatherstripping and greater sash area lower U-factor and airtightness ratings.
Fixed An inoperative window available in shapes that match operable windows, or as accent windows such as half-rounds to create Palladian windows and octagons.
Pros: Improved airtightness. Can be made in nonstandard, custom shapes.
Cons: Doesn’t satisfy egress requirements.
Hopper Tilt-in bottom-hinged window.
Pros: Compression-style weatherstripping. Single glass unit and recessed sash improve U-factor.
Cons: Hazardous if installed at head height or lower.
You have three choices for replacing existing windows: a sash-only replacement; an insert-style frame and sash replacement window; or a new-construction window. If the existing frames have water damage, the only choice is a new construction window (photos, p. 74).
If you’re looking to improve comfort or energy performance, replacing the sashes or using a frame insert can help. They’re a good choice on older homes where you want to preserve period trim, but from an energy and comfort standpoint, they’re not the best option.
Replacement windows that leave the existing frame in place don’t stop air leakage. If you’ve ever pulled out an old window, then you’ve seen fiberglass insulation stuffed between the window and the rough opening. Typically, the insulation is dirty. It wasn’t dirty when it was put there; dirt was filtered out of the air moving through and around the window frame.
Another negative is that insert-style frame and sash replacement windows
reduce the glass area because the unit fits inside the existing frame. You might be willing to live with diminished views, but are you willing to pay for that privilege every year? In a southern climate, the reduced glass area does not affect heating bills, but in northern heating climates, reducing the south-facing glass area gives away a lot of free heat.
An insert-style frame and sash replacement window is generally a bit pricier than a new-construction window. Installation costs are lower, however, because it leaves the existing trim in place and doesn’t require any siding removal.
Regardless of the type you choose, replacement windows are expensive.
If you’re trying to save on energy expenses, new windows shouldn’t be considered until you have improved the insulation and the air tightness of the rest of the building envelope.
For more photos and details, click the View PDF button below: