Build a Breakfast Booth Bench: Step 6
Build a jig for the tapered cuts required for the bench seatback parts.
Since the seatback of this bench is sloped for comfort, it requires a series of parts cut with a taper. Author John White shows you how by making a simple, adjustable jig. After attaching small blocks to a flat board, stock is attached and fed through a tablesaw. This tapering jig is also used for the bench’s legs, and is helpful for any other project requiring angled cuts.
Next step: Install the base unit trim
To learn more about the design principles of this bench, variations of this design and sources for foam cushions, read Breakfast-Booth Basics from Fine Homebuilding’s Annual Kitchens & Baths Issue, #191 (Fall/Winter 2007), pp.91-95.