Connect PEX with Crimp Fittings and Stainless-Steel Clamps
Stainless-steel clamps are an approved method for joining crimp fittings to PEX tubing.
When making a PEX connection using crimp rings and stainless steel clamps, begin by cutting the PEX tubing square. Then slip the stainless-steel clamp onto the tubing, and insert the fitting, making sure it’s fully seated. Before cinching the clamp, position it about 1/8 in. to 1/4 in. from the end of the tubing. You’re aiming to have the clamp over the fitting’s central ribs. Align the tool over the clamp’s protruding ear, making sure that it’s square to the tubing, and squeeze the handles. An internal mechanism in the tool prevents it from opening until the connection is fully clamped.
For more videos about Connecting PEX fittings, check out:
- Mastered in a Minute: Connect PEX With Crimp Fittings and Crimp Rings
- Mastered in a Minute: Connect PEX With Crimp Fittings and Stainless-Steel Clamps
- Mastered in a Minute: Connect PEX With ASTM F1960 Expansion Fittings and ProPEX Rings
- Mastered in a Minute: Connect PEX With ASTM F2080 Expansion Fittings and Compression Sleeves
- Mastered in a Minute: Connect PEX With Viega PEX Press Fittings
- Mastered in a Minute: Connect PEX With Push Fittings
- Tool Tech: A Rundown of PEX Connection Fitting Systems
Plus, check out Matt’s full article about connecting PEX in FHB #272.
